Being “Homosexual” is a sin…

Of Course “Being” A Homosexual Is A Sin

Being a homosexual, it it means anything, means embracing a certain style of behavior, dress, mindset and mannerisms. Most dress and mannerisms are not sins, but some mindsets and many behaviors are.

Sodomy is a most grievous sin, one that cries out to Heaven for vengeance. Participating in or encouraging others to participate in or even to think well of any sinful act is itself sinful. Lust is a sin; therefore, encouraging lust is also a sin. Pride parades and Pride masses, for example, encourage lust.

To claim (with serious intent) to bewhat you are not is a sin. There are no such things as homosexuals (or necrophiliacs, pedophiles, ecosexuals, etc.) in any ontological or metaphysical sense. Therefore to claim to be a homosexual in this sense is a sin. “Being” a homosexual necessarily only means embracing and endorsing certain set of behaviors, which are sinful, or to boast of suffering certain temptations.

It is not a sin to have a temptation, only to give in to one. It is a sin to lay claim to a temptation as if the temptation is a virtue. It is impossible for anybody to be their temptation. Temptations do not define beings or essences, even permanent temptations. If temptations defined being then we would have Miser Pride Parades and Glutton celebrations. We’d also have gluttonophobia, a medical insult to be cast at those who dislike the sin of gluttony.

It is absurd—logically, biologically, or morally—for anybody to define themselves by their temptations toward certain sins. So it is a sin to say God created people as their temptations. It is thus a sin to publicly boast, as many do, that “God made me suffer constant temptations to sodomy, which makes me special.” If temptations made people into special beings, then necrophiliacs, masturbators, adulterers, zoophilies, ecosexuals, those with other lusts, the greedy, the slothful, the wrathful, the envious, and the impious could all boast of their special gifts and qualities. And, of course, they could claim to be these sins.

Some (and even some well known priests who ought to know better) say the Church has always treated homosexuals, or those with other lusts, badly, or that it has discriminated against them. This is false. It is not only false, but impossible. Since there are no such creatures as homosexuals, the Church could not have treated people which do not exist badly. The Church has, in its past, discriminated against those who practice or who openly advocate sodomy. It now, if anything, openly courts those who boast of having these temptations, or in indulging in them.

Discrimination is good. The Church necessarily discriminates against kinds and types of sins, and against the people advocating or indulging in them. You, dear reader, discriminate, too, in either agreeing or disagreeing with this argument. It is impossible not to discriminate when a decision must be made. It is only true the Church has not always treated every single individual justly. Yet no institution run by people has, or will. Plus, those who claim to indulge in sodomy cannot lay claim to preferential treatment.

Having, encouraging, or requiring people to say “I am a homosexual” or “I am a man who is a woman” or “I am a necrophiliac” or whatever, must necessarily increase sin. It causes sin first by the false identification. It encourages sin by suggesting the normality of the acts, which are then engaged in more often, or by suggesting that mortal sins are venial or even sinless.

There is no such thing as the “LGBT community” in any ontological sense. There are only men and women, boys and girls. Having a group self-identify by their temptation is already absurd; to have a group self-identify by claiming not to be able to help oneself but to given in to a temptation is a sin. As is giving in to the temptation.

We could not have summarized it any better than Lifesite’s Martin M. Barillas (in an article about a faithless priest who encourages sodomy):

The Catechism of the Catholic Church teaches that homosexual acts are “intrinsically disordered” and “under no circumstances can they be approved.” It adds: “They are contrary to the natural law. They close the sexual act to the gift of life. They do not proceed from a genuine affective and sexual complementarity” (CCC 2357).

The Vatican Congregation for the Doctrine of the Faith’s document Considerations Regarding Proposals to Give Legal Recognition to Unions Between Homosexual Persons says Catholics have a “duty” to oppose same-sex “marriage.”

It is, as is and always has been obvious, impossible for two men to marry each other.

Telling a person he is, or a person claiming to be, a homosexual (or necrophiliac or miser or etc.) is to embrace a lie. No one ever has to give in to temptation. Adopting a manner of living that with greater frequency than otherwise puts one in the way of temptation is nonsensical. To encourage embracing this manner of living, knowing it will increase temptation, and so also the giving in to temptation, is itself therefore sinful.

To say one is a homosexual (or necrophiliac or miser or glutton or etc.) is to claim that temptations are always and ever permanent fixtures, that God in His mercy cannot eliminate or lessen them for any person. And that is perhaps the biggest sin of all.

Never use the enemy’s language


Mason Dixon Tactical

July 4th 2019

Independence Day. The day The founders of our nation told the king of England that we had a higher standard for our national identity than what his monarchy provided. The day that a declaration of our independence from England was read to the, soon to be, Citizens of this land mass known as the United States of America. A declaration that espoused what all of mankind was entitled to by it’s Creator in the form of rights due to mankind’s very existence.

All men are created equal: Although true that all men start out equal, some excel in life and their endeavors. Some are content with status quo. Finally, some are miserable failures because they can’t get out of their lazy, socially entitled, mindset of mental victimhood.

Life: You have the Right to exist and survive through your own efforts. No person or government has the right to end your…

View original post 2,333 more words

The Sigil of the Orthosphere

The Orthosphere

Thanks to InfoGalactic, I learned the other day a bit about Chaos Magic. I had searched on “egregor” – the Greek for “watcher,” a topic of some interest to me – and found out that it is a term of art in that discussion. In Chaos Magic, an egregor is an artificial spirit, created by a magician as at first a heuristic hypostatization, a “thought form,” devised for his own convenient internal usages, of some nexus of impulses within himself – sometimes nice, sometimes not so nice (as, say, a besetting temptation) – so as to identify and, above all, simply *notice it,* and thus address it more aptly; and then at some point publicly promulgated, so that it then engages the interest and attention of other practitioners, who find it useful and adopt it for their own internal operations, so that it then…

View original post 1,989 more words

Inexpensive and Simple Mono- or Multi-Band HF Ham Radio Antennas

, by PrepperDoc

One of the distinguishing features of traditional Ham radio, particularly shortwave (high frequency or “HF”) Ham radio, was that you generally had to literally make your own antenna. You could purchase transmitters, receivers, transceivers, microphones, and even Morse code keys, but you likely had fabricated at least one wire antenna. In the event of a national disaster, many people may wish to have effective HF communications for medium- or long-range communications, and they may be faced with the need to construct an antenna. Other forward-thinking preppers may wish to gain Ham radio licenses and experience in HF communications and need to put up such an antenna right now. This article will explain two simple antennas.

Resonant half-wave dipole

The easiest antenna to make at home is a resonant half-wave center-fed dipole.[1, 2]This antenna’s length is selected to work well on one Ham radio band, with an acceptable standing wave ratio (SWR) over about a total bandwidth of about 3% of its center frequency, which is usually enough. It may also work acceptably on the 3rd harmonic frequency. Hence a 7MHz dipole (40 meters) may function acceptably on 21MHz (15 meter Ham band).

Unfortunately, a bit of trial and error is needed to make a resonant half-wave dipole. There are just too many things that can affect the actual resonant frequency for any length formula to be guaranteed. You will need an SWR meter (or alternatively, an antenna analyzer, which is a much more expensive instrument) and considerable patience.[3] The first trial length to use is: total length in feet = 468/(frequency in MHz). For example, an antenna made for 7.2 MHz would have a total length of 65 feet. Add a few inches for loops to connect to both center and end insulators for mechanical support. Cut your wire in half (each end is now 234/frequency), and insert a center insulator in the middle. Insulators can be fancy commercial glass or plastic ones, or simple pieces of suitably heavy PVC, plastic, or even paraffin-soaked wood, about 3″ long and 1″ wide with a hole drilled or punched a half-inch from each end. They just have to be reasonably strong, and non-conductive! Run a wire end through the hole and wrap or tie it back onto the wire. You don’t have to solder the wrap on the end-insulators. You do have to connect your transmission feed line’s two conductors, one to each half of your antenna, at the center insulator. Most people use coaxial cable transmission line to feed this sort of antenna, usually 50-ohm RG-58A/U or similar. (This is because the antenna will have a center characteristic impedance near 50 ohms, and the transmitter output impedance is usually 50 ohms also, so power flows smoothly if the coax has the same characteristic impedance. This impedance is simply the ratio of the voltage to current of energy flowing through the lines.) Solder the shield to the wire on one end of the center insulator and the center conductor of the coax to the other. Be careful not to melt the coax insulation and short it out. (Using pliers to create a heat block is helpful). If you can’t solder, you could try crimping the connection. If you need this antenna to work for quite a while, dab dielectric grease or some other non-conductive water repellant on the exposed portions of the coax at the center conductor.

Pull the antenna up to your desired height using suitable ropes. Do not use the coax to pull the antenna up; you’ll rip the dainty coax conductors. It really isn’t important whether the antenna is sloping or even V-shaped (either up or down) within some reasonable limits. If the antenna is more than half a wavelength high above ground, it will send more energy toward the horizon (favoring longer distance contacts). If the antenna is lower, at 0.1-0.2 wavelengths height, it will tend to send more energy nearly straight up (favoring contacts a few hundred miles away).

Now the fun begins. Chances are good that your SWR will not be a beautiful 1:1, or even an acceptable 2:1, at your desired frequency range. One can use trial and error, cutting or lengthening the antenna until success is achieved. (Reasonable lengths can be added to each end by simply twist-connecting them at the end and allowing several inches to simply drop downwards. It works!) A more calculating approach is to move to the lowest legal frequency (on the desired band) and measure the SWR, then to the highest frequency (on that band) and remeasure the SWR. Depending on which is better, you now have a clue as to whether you are too long (better SWR at lower end) or too short (better SWR at higher end). I can, well, remember tediously measuring an antenna to the nearest 1/16″ and then finding it was feet off of resonance! When you are way way off, the SWR is terrible at both ends of the band, and the best thing to do is to add or subtract 2-3% of your length and try again.

Additional half wave antennas can be connected “in parallel” at the center insulator; use creative supports so that the wires don’t tangle and achieve two feet or more separation at the end of the shorter antenna. Google this for more information.

Non-resonant antenna/tuner

A slightly more complicated but ultimately more versatile antenna, which can be constructed in perilous times without any commercial supplies other than a SWR meter, is a non-resonant horizontal dipole antenna with a very simple L-network antenna tuner. Commercially sold antenna tuners are usually fancier, using Pi- or T- networks. (The letter designation is to indicate roughly the configuration of inductors and capacitors when drawn in a schematic.) These tuners are generally able to match just about any random piece of wire acceptably. If you have a commercial antenna tuner, or can get one, they will work very well. If you can’t, a homemade L-network is not as versatile, but it is easy to build! An accompanying schematic shows that the L-network has only two components: a variably-tapped inductor and a variable capacitor.[4]

Schematic of L-network

The Antenna

The antenna is a horizontal (or sloping, if need be) dipole just as above, with one proviso: its length must be longer than a half-wave dipole would be for the lowest frequency desired. Avoid trying to run a short antenna. This is because shorter antennas have lower radiation resistance and one can end up with very inefficient results where huge currents are flowing in lousy transmission wires and wasting a considerable amount of the available transmitter power before ever reaching the antenna. It doesn’t even have to be a dipole with equal halves. In a pinch, you can use just a single long wire, longer than half wavelength, and use a grounded wire as the other half of your antenna.

Transmission Line

Coax is expensive and will likely have high losses or even develop destructive arcs at various matching situations when used with a non-resonant antenna. I don’t recommend it for use with a non-resonant antenna. Simple “ladder-line” transmission line consisting of two wires held a couple of inches apart (like railroad rails) can be used to very efficiently get your transmitter’s power up to the antenna. (You can even use 300-ohm TV ribbon transmission line with good outcome at lower powers, say up to 100 watts.) Try using wire of at least 16 gauge and preferably 14 gauge. Insulated wire is a bit preferable. Use a spacing of two to three inches, maintaining your chosen spacing by using “railroad ties” made of non-conductive 1/2″ PVC short stubs with two holes drilled and the transmission line threaded through them. It ends up looking just like a ladder or a railroad line. The PVC pipes should be spaced about every 6-12 inches, and can be secured either by relatively tight holes, or a bit of insulating black electrical tape, or even a string tying the wire to the PVC. While it looks inexpensive, this sort of transmission line has virtually zero loss, and unless your wires lose all their spacing, is unlikely to ever have a flashover arc!

Homemade ladder-line transmission line

Here’s some nerdy stuff for the more electrically-minded reader; this sort of air-insulated ladder line will have a characteristic impedance of a few hundred ohms and will be horribly mismatched to the antenna, but because the conductors are hefty and the insulator (air) has virtually zero loss, as long as you can get a “match” with your matching network, virtually all of your transmitter power is going to end up getting radiated!

Constructing the L-network Tuner

First, make a variable-tapped inductor. Wind about 40-60 turns of 14-gauge solid wire around a 1 1/2 inch PVC pipe or wooden (not metallic) cylindrical support. Bare wire would be best, but space the wire out a bit so the adjacent turns don’t short out and so you can grasp individual wires with a small alligator clip. You can use co-wound string to set the spacing and then remove it, and you can maintain the spacing with some epoxy glue drizzled along the bottom. Connect a flexible wire to one end of your homemade inductor, and use an alligator clip to allow the ability to short out (and hence electrically remove) any desired portion of the inductor. If you used insulated wire, cut off the insulation along the top edge of your coil so you have a place to connect the alligator clip.

Homemade L-network

The Variable Capacitor

If you can find a variable air-gap capacitor of roughly 250 or so picofarads, that will do for the capacitor; connect it as in the accompanying schematic. You want an air gap of at least 0.01 inches (the thickness of three sheets of paper), or you may have flashover arcs at times. A gap of .02 inches is better. If you don’t have such a capacitor, you can actually make a suitable capacitor by taping about 8×10″ of aluminum foil to one side of dry cardstock or thin cardboard, taping a wire to it, and affixing another 8×10″ of aluminum foil to a fixed piece of heavier cardboard, and a wire connected with tape. With the cardstock kept between the two and sliding the top foil variably over the bottom, you have a fine variable capacitor! I did this as a teenager, and it worked well. Arrange for the wires to be 12 inches or less for acceptably low wiring inductance in the HF bands. An accompanying photo shows a homemade aluminum foil sliding variable capacitor that adjusts from about 40 pF to 500 pF.

Homemade sliding capacitor with cardboard as insulator

Adjusting your homemade L network will require some patience. Keep notes once you find settings that work. Start with your transmitter set for a lower power, so that it can remain on for 5-10 seconds of time without damaging the final amplifier. First set your variable capacitor about 20% overlapped, and successively try shorting out variable portions of your inductor from none to all, seeking the setting where the reflected power on your SWR meter is minimized. (Remember the forward power is probably also changing.) Once you find a possible reflected power null, try adjusting your variable capacitor for a better (lower) SWR. Then jockey the inductance a bit and re-vary the capacitance. Avoid touching bare metal on either the alligator clip or the variable capacitor; otherwise, you may get a shocking or burning surprise! If you get the SWR below 2:1, you’re in good shape!

It is always possible that your combination of antenna length and L network will simply not allow a successful low SWR on one certain frequency, and you find it impossible to get an SWR below 3:1. In my experience, this is rare. However, simply remove or add a few feet from one or both ends of your antenna, and it will likely start to work! (In some instances, you may end up connecting the variable capacitor on the input side rather than the output side.)

Once you find a solution that works, you can cautiously raise your transmitter power, looking for any sign of arcing on your variable capacitor. If you’re unlucky and you have an arc, simply reduce your power below where it happened. Using a slightly different tap on your inductor may also help.

After your have found adjustments that work on each of your desired bands, mark them or even solder in fixed “taps” on your inductor to make it easier to quickly connect to them. To move from one of a particular band to the other may take a small adjustment in your variable capacitor or even a turn or two adjustment in your inductor tap.

Your friends will be amazed that you could make a working multi-band antenna with little more than wire, PVC pipe, a bit of tape, and aluminum foil!


[1]ARRL, Single Band Dipoles.

[2] Healy JW. Antenna Here is a Dipole.

[3]PrepperDoc, Understanding the Radio Shack SWR & Power Meter.

[4] An example of a really high-power L network: KC5LDO, L-Network Tuner.

The Miracle of Lavender Oil: 25 Amazing Uses for Survival

When it comes to essential oils, you will find that everyone has their favorites.  There are so many to choose from that deciding which ones to use on a regular basis can be rather daunting.  The ultimate selection is further complicated by the fact that many different essential oils have the very same qualities when it comes to healing and other uses.

For me, the deciding factor has been multifold.  Therapeutic benefit, healing ability, fragrance and cost have played a role in determining what to include in my own collection of essential oils.  You already know about two of my favorites, tea tree oil (melaleuca) and clove oil.  Today I would like to introduce you to a third favorite, namely lavender oil.


Lavender in my front yard

Lavender was the very first essential oil I purchased when I first became familiar with essential oils in the late 1980s.  As someone who is always getting cuts and scrapes as well as burns from careless cooking techniques, lavender used topically has always been my first aid treatment of choice.  As a natural antibiotic, and antiseptic, it has promoted healing and I truly believe that it has prevented scaring.  It also seemed to calm the frequent migraine headaches that thankfully, I have now outgrown.


So what is lavender?  First and foremost, it is a lovely green plant with fragrant purple flowers. It is native to the mountainous zones of the Mediterranean where it grows in sunny, stony habitats. Today, it flourishes throughout southern Europe, Australia, and the United States.  The oil in lavender’s small, blue violet flowers gives the herb its fragrant scent. The flowers are arranged in spirals of 6 – 10 blossoms, forming interrupted spikes above the foliage.

It’s name comes from the Latin lavare, which means “to wash.  It is believed that lit was first used as a bath additive to help purify the body and spirit in ancient Persia, Greece, and Rome.

Historically, lavender has been used as an antiseptic and as a remedy for anxiety, restlessness, insomnia, depression, headache, upset stomach, and hair loss.  It is a key component in aromatherapy, where the scent is used for both healing and relaxation purposes.


From a prepper’s point of view, lavender has three primary uses, as an antiseptic, a topical anesthetic, and as a sedative.

Antiseptic.  Used alone or in combination with carrier oils, lotions or creams, lavender is used on the skin to treat abrasions, cuts, burns, and inflammatory skin conditions.  Lavender helps promote healing and is one of the few essential oils that can can be safely applied to the skin in it undiluted form.

Topical anesthetic.  As a topical anesthetic and pain reliever, lavender oil can dramatically reduce the sensation of pain from burns and insect bites.

Sedative.  Lavender promotes a sense of calm and relaxation and can assist in combating sleeplessness and insomnia.

Beyond these broad uses, there are also many practical applications of lavender essential oil.  Each of the 25 uses below will foster self-sufficiency not only now, but in a survival situation.  They are presented in no particular order.


1.  First Aid.  Use on burns and scalds to avoid the formation of blisters and decrease the pain.  Also use on minor scrapes to prevent scarring.

2.  Stress and anxiety.  Soothe anxiety and stress with the calming effects of lavender oil.

3.  Sleep aid.  Get some sleep by rubbing some lavender on the bottoms of your feet before going to bed.

4.  Menstrual cramps.  Relieve menstrual cramps by rubbing lavender oil over the cramping area of your abdomen

5.  Headaches.  Rub oil on the temples and forehead.  Also try a combination of peppermint and lavender oil for even greater relief.

6.  Bleeding.  A few drops of  lavender will help stop bleeding on small cuts and wounds.

7.  Chest congestion.  Relieve chest congestion the next time you have a cold or the flu by adding4-6 drops of lavender oil to a bowl of hot water. Place a towel over your head, and inhale the vapor slowly and deeply.  Just be careful that the water is not too hot or you will burn yourself.

8.  Muscle pain, sprains.  Add lavender oil with a carrier oil (such as coconut oil or other vegetable oil) and rub on sprains and muscle pains for soothing relief.  This is a great thing to do at bedtime.

9.  Nocturnal foot and leg cramps.  Before bed, rub lavender oil onto the ball of your foot and on to your big toe.  If you wake up with a cramp or charley horse, rub additional lavender oil on the affected area until the pain is gone.  (I have been doing this for about three weeks now and it is working!)

10.  Insect bites. A drop of lavender oil on insect bites helps relieve the itch and help them to heal more quickly.

11.  Insect repellent.  Add lavender to a carrier oil and rub on to your arms and legs for a great insect repellent.

12.  Remove splinters.  Apply a few drops  of lavender to a splinter.  Wait for it to swell and the pesky splinter will be easy to remove.

13.  Fatigue.  Add a few drops of lavender essential oil to your bath water to relieve fatigue.

14.  Fevers.  Add some drops of lavender oil to a cool washcloth and rub gently on forehead, neck, and trunk are to cool down the body. Alternatively, you can also use lavender in a steam vaporizer to bring the comforting warmth to a chilled body.

15.  Exfoliating hand cleaner and scrub.   Make your own bath scrubs. Use sugar, olive oil, and lavender to create a wonderful exfoliating scrub for rough skin.

16. Ingredient in DIY cleaning products.  Add lavender to Dirt Cheap Soft Soap, your homemade spray cleaner, laundry soap and other DIY cleaning products.  (See Prepper Checklist: DIY Cleaning Supplies.)

17.  Calming children.  Put some oil into a diffuser and place it in a child’s room to help them sleep. Or add oil to a carrier oil and rub on the bottom of their feet anytime you want to calm down your child.

18.  Acne. To reduce the swelling and inflammation of acne and to reduce the risk of an infection that could lead to scarring, add 5 drops lavender oil to 1 teaspoon warm water and stir. Dip a clean cotton ball into the mixture, and hold to the head of the pimple. Repeat as often as desired.

19.  Sunburn.  Treat sunburn by making a soothing skin toner of 2 drops lavender oil with 1/2 cup witch hazel, 1 tablespoon apple cider vinegar and 1 tablespoon rosewater. Apply after cleansing.

20.  Footbath.  Footbaths can be a powerful remedy for headaches. The hot water draws blood to your feet, easing the pressure on the blood vessels in your head. Add a few drops of lavender essential oil to a footbath to provides soothing relief for a headache.

21.  Itchy scalp.  Mix lavender oil with water and massage into the scalp. You can also add a few drops to your favorite conditioner after shampooing your hair.

22. Moths.  To repel moths in the closet, make a little sachet of cotton balls doused in lavender oil.  Or if you are lucky enough to grow lavender in your yard, make up a little bundle of dried lavender leaves and flowers to to keep the moths away.

23.  Solvent.  Lavender oil can be used as an organic solvent that will rapidly help remove grease, glues and paint from various surfaces – and all the while with a much more pleasant odor than other chemical solvents.

24.  Air Freshener. Add 5 to 6 drops lavender is a small mason jar.  Add some baking soda then punch holes in the lid. Place in smelly areas (near the garbage can and laundry hamper, for example) and shake the jar often.

25.  Scented candles. Add lavender oil to your homemade emergency candles for a nice calming scent when you need it most.


Essential oils have been a part of my life for close to 25 years. I use them neat (topically applied directly to the skin), as a lotion or cream mixed with coconut oil or other carrier, as a scrub in my hand and foot cleaner and as a component to my DIY cleaning products.  In addition to lavender, I regularly use peppermint, rosemary, tea tree, clove and varying types of citrus with my current favorite being orange.  I also have an abundant supply of both lavender and rosemary in my yard and enjoy their fragrance as I walk up the front stairs to my home.

Shopping for essential oils can be expensive.  Without hesitation I recommend that if you only afford one, make it lavender!


Family. Ministry. Theology. Writing.

Founding Questions

Lighting Up the Endarkenment

Bertin Classic Cycles

A weblog about Andre Bertin's bicycles.

Tactical Wisdom

Tactical Training with a Biblical foundation


Documenting The Death Of America

Spycraft 101

Your Clandestine Classroom

Thoughts From Frank & Fern

Experiences from country living; self-sufficiency; Christian values; amateur-ham radio; a hard working good life; and Humor is the Essence of Survival.

Adam Piggott

Gentleman adventurer

Michael Scheuer | Non-Intervention

Foreign policy independent of all, under the influence of none.

American Partisan

A vanguard movement of Western Civilization

A Lady of Reason

Conservative Values From a Secular Perspective

Now The End Begins

End Times News & Bible Prophecy

For the Sons of the West

epic fragment by a dead, unsung poet


We don't have to live like this.

Angry White Men

Tracking White Supremacy

Making It Up

Enjoying Radio and Maker Hobbies